Amp ratings vs. US AWG wire gauges.
The AWG - American Wire Gauge - is used as a standard method denoting wire diameter, measuring the diameter of the conductor (the bare wire) with the insulation removed. AWG is sometimes also known as Brown and Sharpe (B&S) Wire Gauge.
The AWG table below is for a single, solid, round conductor. Because of the small gaps between the strands in a stranded wire, a stranded wire with the same current-carrying capacity and electrical resistance as a solid wire, always have a slightly larger overall diameter.
The higher the number - the thinner the wire. Typical household wiring is AWG number 12 or 14. Telephone wire is typical AWG 22, 24, or 26.
The table below indicates the current ratings of PVC-insulated single and multicore wiring cables. Be aware that the current load depends on installation method - the enclosure - and how well the resistance heat is removed from the cable. Operating temperature of the conductor, ambient temperature and type of conductor insulation is important. Always check the manufactures data before detailed engineering.
For full table with Single Core and Multi Core Current Ratings - rotate the screen!
| AWG | Diameter (mm) | Diameter (in) | Square (mm2) | Resistance Copper (ohm/1000m) | Resistance Aluminum (ohm/1000m) | Typical Max. Current Load Ratings - Copper (amps) 1) | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Single Core | Multicore | ||||||||||
| up to 3 cores | 4 - 6 cores | 7 - 24 cores | 25 - 42 cores | 43 and above | |||||||
| 40 | 0.08 | . | 0.0050 | 3448 | 5300 | ||||||
| 39 | 0.09 | . | 0.0064 | 2693 | 4141 | ||||||
| 38 | 0.10 | 0.0040 | 0.0078 | 2210 | 3397 | ||||||
| 37 | 0.11 | 0.0045 | 0.0095 | 1810 | 2789 | ||||||
| 36 | 0.13 | 0.0050 | 0.013 | 1326 | 2038 | ||||||
| 35 | 0.14 | 0.0056 | 0.015 | 1120 | 1767 | ||||||
| 34 | 0.16 | 0.0063 | 0.020 | 862 | 1325 | ||||||
| 33 | 0.18 | 0.0071 | 0.026 | 663 | 1019 | ||||||
| 32 | 0.20 | 0.0080 | 0.031 | 556 | 855 | ||||||
| 30 | 0.25 | 0.010 | 0.049 | 352 | 541 | ||||||
| 28 | 0.33 | 0.013 | 0.080 | 216 | 331 | ||||||
| 27 | 0.36 | 0.014 | 0.096 | 180 | 276 | ||||||
| 26 | 0.41 | 0.016 | 0.13 | 133 | 204 | ||||||
| 25 | 0.45 | 0.018 | 0.16 | 108 | 166 | ||||||
| 24 | 0.51 | 0.020 | 0.20 | 88 | 133 | 3.5 | 2 | 1.6 | 1.4 | 1.2 | 1.0 |
| 22 | 0.64 | 0.025 | 0.33 | 52 | 80 | 5.0 | 3 | 2.4 | 2.1 | 1.8 | 1.5 |
| 20 | 0.81 | 0.032 | 0.50 | 34 | 53 | 6.0 | 5 | 4.0 | 3.5 | 3.0 | 2.5 |
| 18 | 1.0 | 0.040 | 0.82 | 21 | 32 | 9.5 | 7 | 5.6 | 4.9 | 4.2 | 3.5 |
| 16 | 1.3 | 0.051 | 1.3 | 13 | 20 | 15 | 10 | 8.0 | 7.0 | 6.0 | 5.0 |
| 14 | 1.6 | 0.064 | 2.1 | 8.2 | 13 | 24 | 15 | 12 | 10 | 9.0 | 7.5 |
| 13 | 1.8 | 0.072 | 2.6 | 6.6 | 10 | ||||||
| 12 | 2.1 | 0.081 | 3.3 | 5.2 | 8.0 | 34 | 20 | 16 | 14 | 12 | 10 |
| 10 | 2.6 | 0.10 | 5.3 | 3.3 | 5.0 | 52 | 30 | 24 | 21 | 18 | 15 |
| 8 | 3.3 | 0.13 | 8.3 | 2.1 | 3.2 | 75 | 40 | 32 | 28 | 24 | 20 |
| 6 | 4.1 | 0.17 | 13.3 | 1.3 | 2.0 | 95 | 55 | 44 | 38 | 33 | 27 |
| 4 | 5.2 | 0.20 | 21.2 | 0.81 | 1.3 | 120 | 70 | 56 | 49 | 42 | 35 |
| 3 | 26.7 | 0.65 | 0.99 | 154 | 80 | 64 | 56 | 48 | 40 | ||
| 2 | 6.5 | 0.26 | 33.6 | 0.51 | 0.79 | 170 | 95 | 76 | 66 | 57 | 57 |
| 1 | 7.4 | 0.29 | 42.4 | 0.41 | 0.63 | 180 | 110 | 88 | 77 | 66 | 55 |
| 0 (1/0) | 8.3 | 0.33 | 53.5 | 0.32 | 0.50 | 200 | |||||
| 00 (2/0) | 9.3 | 0.37 | 67.4 | 0.26 | 0.39 | 225 | |||||
| 000 (3/0) | 10.4 | 0.41 | 85.0 | 0.20 | 0.32 | 275 | |||||
| 0000 (4/0) | 11.7 | 0.46 | 107 | 0.16 | 0.25 | 325 | |||||
| 250 | 127 | 345 | |||||||||
| 300 | 152 | 390 | |||||||||
| 400 | 178 | 415 | |||||||||
1) Current ratings for up to 1000 V , PVC-insulated single and multicore wiring cables, ambient temperature up to 30 oC
Download and print AWG chart
Values for resistance are based on electrical resistivity for copper 1.724 x 10 -8 Ω m (0.0174 μΩ m) and electrical resistivity for aluminum 2.65 x 10 -8 Ω m (0.0265 μΩ m).
- prefixes
The higher the gauge number, the smaller the diameter, and the thinner the wire.
Because of less electrical resistance a thicker wire carries more current with less voltage drop than a thinner wire. For longer distances it may be necessary to increase wire diameter - reducing the gauge - to limit voltage drop.
Correction-factors at ambient temperature above 30 oC
- ambient temperature 31 - 40 oC : correction factor = 0.82
- ambient temperature 4 1 - 45 oC : correction factor = 0.71
- ambient temperature 45 - 50 oC : correction factor = 0.58
Related Topics
Electrical
Electrical engineering with units, amps and electrical wiring. Wire gauges, electrical formulas, motors and more.
Related Documents
12 Volt - Wire Gauge vs. Amps
Maximum current (amps) in a 12V electrical circuit vs. size (AWG) and length of wire.Aluminum and Copper Wires - Electrical Resistance vs. Cross-Sectional Area
Electrical resistance in plain copper or aluminum wires.AWG - American Wire Gauge Converting Chart
American Wire Gauge (AWG) vs. cross sectional area converter.Copper Wire - Electrical Resistance vs. Gauge
Gauge, weight, circular mils and electrical resistance in copper wire.Electric Cable Size vs. Current Rating
Amps vs. cable size for fixed installations in buildings.Electric Wire - Calculating Cross-Section Areas
Calculate single and bunched electric wire cross-section area and diameter.Electric Wire - Maximum Length with 240 Volts Single-Phase Power
Maximum length of 240 V single phase electric wire with max. 2% voltage drop.Electrical Metal Tubing (EMT) - Conduits
Trade sizes and max. distance between conduit supports.Electrical Motors - Single Phase 230 V Circuit Wiring
Copper wire gage and transformer size for single phase 230 volts electrical motors.Intermediate Metal Conduit - IMC
Lighter and lower cost metal conduits.Power Wiring - Color Codes
Color codes used in power wiring.Rigid Aluminum Conduit - RAC
Rigid Aluminum Conduit dimensions.Smaller Circles within a Large Circle - Calculator
Calculate the number of small circles that fits into an outer larger circle - ex. how many pipes or wires fits into a larger pipe or conduit.Standard Gauges
Standard gauges for wire and sheet - American, Birmingham, Washburn, Music, Stubs ..Wire Size - Area to Diameter Converter
Convert wire area from square mm to diameter mm.
Search
Search is the most efficient way to navigate the Engineering ToolBox.
- Popular internal searches in the Engineering ToolBox
Engineering ToolBox - SketchUp Extension - Online 3D modeling!
Add standard and customized parametric components - like flange beams, lumbers, piping, stairs and more - to your Sketchup model with the Engineering ToolBox - SketchUp Extension - enabled for use with older versions of the amazing SketchUp Make and the newer "up to date" SketchUp Pro. Add the Engineering ToolBox extension to your SketchUp Make/Pro from the Extension Warehouse!
Translate this Page
Translate this page to Your Own Language.
About the Engineering ToolBox!
Privacy Policy
We don't collect information from our users. More about
- the Engineering ToolBox Privacy Policy
We use a third-party to provide monetization technologies for our site. You can review their privacy and cookie policy here.
You can change your privacy settings by clicking the following button: .
Advertise in the ToolBox
If you want to promote your products or services in the Engineering ToolBox - please use Google Adwords. You can target the Engineering ToolBox by using AdWords Managed Placements.
Citation
This page can be cited as
- The Engineering ToolBox (2003). AWG - American Wire Gauge Current Ratings . [online] Available at: https://www.engineeringtoolbox.com/wire-gauges-d_419.html [Accessed Day Month Year].
Modify the access date according your visit.
